Garage Door Spring Replacement Cost in Tooele, UT (2026)

Typical Cost in Tooele

Most homeowners pay between $150 and $350 for a single spring replacement, parts and labor included. Here’s how it breaks down by spring type:

• Torsion spring (the most common type, mounted horizontally above the door): $150–$350 installed.
• Extension spring (runs along the tracks on lighter doors): $120–$200 installed.
• Heavy or oversized double doors (common on Erda shop garages and newer Stansbury homes): often $300–$450, since they need larger, higher-cycle springs.

Those figures include the part and the labor to install it. Our service-call fee is waived when you approve the repair, so what you’re quoted is what you pay — you’re not paying twice.

Torsion vs. Extension: Which Do You Have?

Look above your closed garage door. If you see a single thick spring stretched along a metal bar directly above the door opening, that’s a torsion spring — standard on most homes built in the last 20 years. If instead you see a long spring running along the upper track on each side of the door, stretching and relaxing as it opens, that’s an extension spring — more common on older Tooele homes. Torsion springs are safer, last longer, and are what we recommend installing if you’re upgrading from extension springs.

What Changes the Price

Four things move the number up or down: door weight, spring quality, how many springs, and what else is worn.

• Spring size & door weight — a heavier, insulated steel door needs a stronger (and pricier) spring than a lightweight aluminum one.
• One spring or two — many doors run a matched pair, which we usually recommend replacing together (see below).
• Spring quality — a standard 10,000-cycle spring costs less upfront than a 25,000-cycle spring, but the higher-cycle one can last two to three times longer.
• Related wear — if the cables, bearings, or rollers are also worn, they’re inexpensive to swap while the door is already apart, and it saves you a second service call later.

Should You Replace Both Springs?

Yes, if your door has two springs — replacing them as a pair usually saves you money in the long run. Both springs are installed at the same time and take the same number of open-close cycles, so when one snaps, the other is typically close behind. A second emergency call a few weeks later costs more in combined service fees than doing both today. We’ll always tell you the condition of the second spring so it’s your call, not a hard sell.

Is It Worth Replacing the Spring Yourself?

No — a torsion spring is one of the most dangerous DIY repairs in the house. A garage door torsion spring is wound under hundreds of pounds of tension, and it’s one of the most common causes of serious home-repair injuries when it’s mishandled — broken fingers, facial injuries, and worse are common when a spring or winding bar slips. The specialty winding bars aren’t sold at most hardware stores, and the correct number of turns depends on the exact spring size. For a repair this affordable, it’s not worth the risk. See our full garage door spring repair page for how we handle it.

Frequently Asked Questions